HugoLarge

I’ve had the original iPhone 2G for going on nine months now. I really didn’t plan on getting the 3G model until the other day when I took a look on eBay to see how much people were selling the 2G models and the sale prices. Final selling prices were well over $300 and even $400 dollars which really surprised me. So I decided to get the upgrade and sell my 2G on eBay to recover the price of the new iPhone.

So the journey began yesterday when I listed my iPhone on eBay. I’m not a big eBay user but I’ve got almost forty sales and purchases under my belt. I’ve sold high dollar items like my old PowerBook G4 this past spring after getting a new MBP. So I’m not too worried about getting a good sale price for the iPhone. I’ve listed the auction for five days and as of right now I have no bids. No biggie, they’ll come in. The big question for me was which 3G to buy.

The first choice was deciding which size I wanted? The 8GB or the 16GB model? I really don’t use my phone much for the iPod features as much as I do the web, email and social networks like Twitter. So space was not an issue.

After thinking about for a day or so I decided to get the larger 16GB iPhone since I feel it will have a better resale value if I ever sell it. Which is very probable.

So after deciding on the 16GB model, the second choice was which color would I choose? As you may have seen in an earlier post, I’ve recently bought a Flip Mino. I got the black model of the Flip but after using it I’ve noticed how bad you can see all the finger prints and dust. I took my experience with the Flip and did some other research as to what the iPhone community thought about to two colors.

After reading many forum posts and blogs I almost had my mind made up. The last thing I wanted to do was to see the iPhone in person. So instead of going to the local Apple store as I did for the first iPhone purchase, I decided to go to the closer AT&T store. I think it was a good choice since when I arrived, there was only one other customer in the store. I spent a few minutes comparing both black and white and decided to go with white.

Prior to this point I had two concerns; the first was how do I get all my data and settings off the original iPhone and onto the new one. And second was; how do I prep my old iPhone to be sold on eBay?

After a little reading I found an article on iPhoneHacks.com that explains how you can use the same iTunes backup of the old device and restore it on the new iPhone. So this is what I did to tackle the first concern.

1. First I synced the old iPhone to iTunes which like we all know takes forever to complete a backup. I did this earlier in the morning before I left home because I had planned on stopping by the AT&T store later that day. For those of you that use SMS a lot and want the most recent conversations saved and transferred then you might want to do a backup closer to the time you purchase the new iPhone.

2. Next I went to the AT&T store (since it was closer to my home) and purchased the new iPhone. One thing I could have done was turn the old iPhone off prior to buying the new iPhone since an in store activation is required but if was no big deal. For the heavy SMS users this might prevent any missed messages.

One thing I did not like was that the box had to be opened in store to activate. That blew any “unboxing” shots that I may have wanted to take. They also plug the iPhone into their POS (Point of Sale) Windows PC for some reason. I don’t know if they do all that at the Apple store but it kind of bothered me.

Once I left the store my iPhone was activated and could be used.

3. After I got home I hooked up the new iPhone to the MBP and was prompted to either setup the iPhone as a new device or do a restore from backup. I choose the restore option but was prompted that the iPhone could not be restored since it had an earlier software update. My old iPhone was running version 2.0.2 and the new iPhone came with 2.0.1 software.

At that point I went into the iTunes prefs and disabled all devices to auto sync. Just in case it tried to sync before doing the software update and restore.

After the software was updated I was able to do a complete restore to the new iPhone from the old iPhone backup.

4. During the restore process I noticed my old phone still receiving emails. This was due to the phone being connected to my WiFi. So I turned off WiFi. Problem solved.

5. Once the restore was complete, which took some time, I verified all the iPhone sync settings in iTunes were correct (from screenshots I took earlier). After all were verified I performed a sync, which also took a long time to complete.

6. After the content sync was complete it was time to verify all the settings and data restored properly. Everything looked good with the exception of two items.

One was that visual voicemail was not setup and therefor did not restore my saved messages. This may have been my fault. Maybe if I would have gone through the setup prompts, the old messages would have been restored. If anyone knows please leave a comment. I’ll have to research that one later.

The only other thing that needed setup was the passcode required by policy for my employers Exchange server.

Once those two items was straightened out, the iPhone was back to the original state.

The second concern I had was how to erase all personal data from the old iPhone prior to selling it on eBay. After more research I found another article on iPhoneHacks.com that explains how Apple includes a secure reset and erase of all data in the 2.0 software.

To do this you go to Settings > General > Reset and choose Erase All Content and Settings from the list of options. This is supposed to do a secure write over all data and reset the iPhone to factory new setting, ready to be activated (or jailbroken) and synced. The process can take up to two hours to complete so you may want to plug it into the USB power adapter.

So here I am, new iPhone all restored and synced up, using the mobile WordPress app.

I have to say, I was concerned that the rounded plastic back of the 3G iPhone would bother me as I really liked the aluminum look and feel of the 2G. But after using it for a few hours it actually feels really nice in my hand. The iPhone 3G seems to be a tiny bit wider than the 2G as well but not noticeable.

I was also unsure about the color white but it doesn’t bother me and I’m getting used to the refreshing change from all those other black cell phones out there.

So in conclusion, I’m very pleased with the new 3G iPhone design and upgrade process. And with a little planning, you can reduce the pain factor to very low.

Now let’s see how well the new 3G speeds work out.

I still have the 1st generation (EDGE) iPhone and for the most part it’s been working fine. Apple released firmware update 2.0.2 today via iTunes and as usual I promptly installed the update.

So far I can’t really tell if anything on the surface has been updated or fixed. I can tell you that prior to this update, going into Contacts seemed a bit slow, slow enough to make me think the app was hung. Scrolling within Contacts at times was also slow and jerky. Now, with the 2.0.2 update, Contacts seems to launch faster and the scrolling seems to have improved. 

The App Store still has discrepancies between available updates within the iTunes interface and the App Store app on the phone itself. Right now iTunes shows I have four apps that have updates but the iPhone says I have one. Which one do I believe?

Another annoyance has been a delay in typing that has been present since the original 2.0 update. The 2.0.2 update does not appear to fix the problem and it’s too early to tell if the update has at least helped. One really annoying typing delay (for me) is when entering my Passcode after the iPhone has been locked. This is a policy requirement for the company I work for to use Exchange support. The first few characters always delay in both typing response and tick sounds as I type. I’ve also noted some early typing delays when using both Mail and Twitter apps.

One thing I’ve done prior to installing firmware updates is to reboot the iPhone with the two finger reboot. This seems to clean up any running processes prior to applying the update. I’ve also disabled crash reporting to Apple (via LifeHacker) during iPhone sync which seems to have increased overall sync and firmware update speed. I know what some don’t agree with disabling this “feature” but until Apple makes the process faster, I’ll keep mine disabled.

Only time will tell if the update has improved the usability of the iPhone or corrected “bugs” as Apple says. Please keep in mind that I still have the EDGE iPhone and 3G iPhones may experience different results.

In this How To I’ll show you a method of removing the DRM protection from purchased music from the iTunes music store. I have not tried this on any other DRM protected media but I don’t see why it would not work.

In order to remove the DRM protection from purchased music in iTunes you will need iMovie HD 6, which is a free download on the Apple web site. Once you have iMovie HD 6 installed on your system, follow these steps to remove the DRM:

1. Open iMovie HD and create a new project. The project name can be what ever you’d like since the project can be deleted once the process is complete.

2. Select the Media tab in iMovie and then click on your iTunes Library in the Audio browser window at the top of the interface. You can search for the song to make it easier to find.

3. Once you’ve found the song you want to convert, drag it to the audio time-line at the bottom.

4. iMovie will now import the file.

5. After the import is complete you need to add an image to the time-line or else the project will not export. To do this click the Photos tab above the media browser and select an image from either iPhoto or Aperture. The photo does not matter as it’s only used to allow the project to export. Disregard the Ken Burns Effect pallet as it will go away once the photo is rendered in the time-line.

6. Now the project is ready to be exported. To do this, click the Share menu and choose Quicktime. In the Compress movie for: drop down, select Expert Settings and then click the Share button. This will open the Save exported file as… window. From here you can choose where you’d like the exported file to be saved, I use the default Movies folder in my Home Folder. You’ll want to select the Export: drop down and choose Sound to AIFF as the export format. All other settings can be left at default. Then click Save and the project will save and compress the project.

7. At this point you can browse the Finder to the location you’ve saved the file and drag the .AIFF file into your iTunes Library.

8. Once the file is in your iTunes Library, you can change all the file info to match the Artist, song title, album and so forth. You can even drag the album art from the original file in iTunes out to your desktop and then drag the same file into the newly created DRM-Free file. You’ll also want to convert the new file to AAC by selecting the file and control-click or right click the file and choose Convert Selection to AAC in the context menu.

9. At this point the original song file has been stripped of it’s DRM and converted back to an audio AAC file that can used by GarageBand to create a ringtone for the iPhone.

Stay tuned for a How To on creating ringtones in GarageBand.

Disclaimer: The sole purpose of removing the DRM from purchased iTunes music in this How To is to allow the file to be used to create ringtones for the iPhone. These files are not being redistributed in any way.

The new iPhone app for Wordpress was released today so I wanted to give the new app a try. This post was written using the Wordpress app and I have to say the interface is really nice and easy to use.

Since this is a new blog for me, I don’t have all my categories in place. But no worries, you can add new categories right from the iPhone Wordpress app.

Overall, typing out and submiting a blog post is pretty easy with this app. If you write for a blog and use the iPhone, this is one app you need to try for yourself.

Check out some of the iPhone screenshots taken and uploaded with Wordpress app.

Main screen

Write Post

Posts

For some reason a screenshot of the photo upload page would not capture. I guess you’ll have to check it out for yourself.